Tip No 3: Exhaust to Manifold Fitting
This can be a real pain to do on your own as it's difficult to get the exhaust flush with the manifold. Here's my solution:- Jack up the front of the car
- Place some bricks under the exhaust(I use 3 brick pavers, approximately 150mm).
- Gently lower the jack until the exhaust butts up to the manifold.(Don't drop the jack all the way, you could crush the exhaust!)
- Tighten up exhaust clamp
- Remove bricks and jack
posted by Andy Tyrrell @ 4:20 PM
0 Comments:
Post a Comment
<< Home